Standard Features

1. 1. Carbon steel units are painted with blue enamel unless otherwise specified. Food grade white epoxy and hi temperature inorganic carbon/zinc primer are optional interior unfinished.
   2. Standard stainless steel will be supplied with mill finish (only contact parts will be considered), welds are not typically ground smooth, base plates and guards will be supplied in stainless steel. Base plates can include an optional stainless steel lined through hole. Bearings, motors and gear reducers will be supplied with factory finish to provide original warranty.
   3. Sanitary style units will be polished to 120 grit interior. All welds inside will be ground smooth, continuous, free of pits and crevices. Base plates and guards will be stainless steel.
   4. All units will include air purge shaft seals.
   5. All particle crushers will include a 230/460/3/60 TEFC 1800 rpm motor with a belt or direct drives with gear reduction for severe applications. All drives are mounted on the right side, motors are mounted inward (left angle), unless otherwise specified.
   6. Dual rotor crushers require a breaker bar or screen.
   7. Infeed hoppers with safety baffles are optional.
   8. Support stands are optional. When stainless is specified, the base plate will also be stainless steel or a carbon steel plate with a stainless steel lined through hole can be offered.
   9. Starters are optional- panels are offered in type 12, 4, and 9 enclosures and are shipped loose.
   10. On powder applications, venting and/or dust collection should be considered.