Stainless Steel construction on an optional elevated base and a custom hopper
Model 2020 stainless steel lumpbuster on a custom mounting base plate to go over a screw feeder for a pharmacuetical company.
Inside view of a Model 2020 stainless steel lumpbuster with a stainless steel hopper. Angle frame inside hopper is for a removable bar grate.
Model 1515
Stainless Steel Lumpbuster on a Stainless Steel Stand with a pneumatic cylinder that lifts the hinged loading chute, so that the material slides into the machine for delumping. When the chute is down for loading it closes off the infeed hopper this prevents the operator from reaching inside. With this type of system there is no climbing a ladder or steps to load the machine. This customer requested that the stand is to be mobil so we added 8" diameter casters for them.
Model 1515 Stainless Steel Lump Buster on a steel base plate with a stainless steel lined through hole 5 HP Motor
Typical finger pattern design used in all lump busters. (other optional designs can be used for special applications)
1515 Stainless Steel Lumpbuster with custom hopper on a carbon steel stand with a stainless steel lined through hole
Model 2020 Carbon Steel Lump Buster 380 Volt 50 hertz 15 HP Motor
Model 2048 Stainless Steel Lump Buster on a carbon steel elevated stand with a stainless steel lined through hole 575 volt 3 phase 60 Hertz 20 HP Motor
Model 2448 Carbon Steel Lump Buster Under Construction
Inside view of a Model 1515 Stainless Steel Lumpbuster with custom stainless steel hopper and breaker bars with cross pins for sizing the material
Model 1515 Carbon Steel Lumpbuster with special hopper and custom gray paint
Bottom view of a Model 1717 lumpbuster screen
Bottom view of a Model 1717 lumpbuster with bar grate with every other bar removed for a larger final product.
Model 1515 Carbon Steel Lumpbuster with 560 volt motor for Canada
Imperial Metal Products, Inc. / Jersey Crusher, Inc. 50 Division Avenue Millington, NJ 07946 ph - 908-647-8181 fax - 908-647-0041 E-Mail Us
